top of page
Steelmaster - Intumescent Paint for Steel
Waterborne single pack intumescent coating/ paint for steel available in Ireland and Northern Ireland.
All our Intumescent coatings Offer 30minute and 60minute fire resistance to steel.
Fully tested and certified to BS476 parts 20/21 for 30minute and 60minute fire resistance to steel.
Applied by brush, roller or spray
Coverage for 30 minute fire protection  is 3.0m²/litre to universal steel beams and columns on average.
For 1 hour fire resistance contact us for individual loadings for our intumescent coatings.
48 hour delivery throughout Ireland and Northern Ireland

Steelmaster - Intumescent Paint for Steel

SKU: 364215376135191
£87.50Price
Quantity

  • Preparation.

    Hamron Steel must always be applied to a primed steel substrate. The surface should be dry and free of dust, salts, grease and other contamination immediately before coating. The primer used should be applied in accordance with the specific technical data sheet instructions and must be approved by Hamron to ensure compatibility with the Hamron Steel.

    Environmental Conditions

    Hamron Steel must only be applied in dry, unexposed conditions that will be free from high humidity and condensation.

    Relative humidity: up to 80%

    Surface temperature: minimum 5ºC maximum 40ºC

    The surface temperature must also be at least 3ºC above dew point.

    Optimum drying conditions are at temperatures above 10°C with good air movement.

    Application procedure

    1. Clean the equipment with suitable solvent , then thoroughly wash with clean water before use.

    2. Stir the product to an even consistency using a power mixer. Thinning is not required

    3 BRUSH/ROLLER- Apply evenly using a clean, well-loaded brush or roller at up to 300 microns (0.3mm) wet film thickness per coat. Allow at least 4 hours drying at 20°C between coats

    4 Clean all equipment with fresh, clean water immediately after use or at least at the end of each working day or shift.

    Physical Data

    Appearance when dry............. matt

    Colour .................................... white

    Substrate ................................ primed steel

    Volume solids ........................ 70±3%

    Shelf life ................................. 12 months

    Dry film thickness (μm) .......... 250 400 500 700

    Wet film thickness (μm) ......... 360 570 715 1000

    Theoretical coverage (m²/l)..... 2.80 1.75 1.40 1.00

    Safety Data

    This product is not combustible

    This product is not a dangerous preparation according to directive 1999/45/EC.

  • £10 - Per item

    £25 - 3+ Items

     

    ***Prices include VAT***

bottom of page