Fire protection IN Northern Ireland | Ireland | UK

Steelmaster - Intumescent Paint for Steel Flametect CWD+ Clear Flame Retardant for Wood Flametect Nitro - Synthetic & Natural Textiles Suppliers across Northern Ireland | Ireland | UK

Intumescent Paint for Steel

Steelmaster

Waterborne single pack intumescent coating/ paint for steel available in Ireland and Northern Ireland.

All our Intumescent coatings Offer 30minute and 60minute fire resistance to steel.

Fully tested and certified to BS476 parts 20/21 for 30minute and 60minute fire resistance to steel.

Applied by brush, roller or spray.

Coverage for 30 minute fire protection is 3.0m²/litre to universal steel beams and columns on average.

For 1 hour fire resistance contact us for individual loadings for our intumescent coatings.

48 hour delivery throughout Ireland and Northern Ireland.

Buy Now
Steelmaster Intumescent Paint for Steel

Click on links below to View Test Reports and Data.

Download: TDS
Download: MSDS
Download: Application Guide

Information

Application Details

Preparation
Hamron Steel must always be applied to a primed steel substrate. The surface should be dry and free of dust, salts, grease and other contamination immediately before coating. The primer used should be applied in accordance with the specific technical data sheet instructions and must be approved by Hamron to ensure compatibility with the Hamron Steel.

Environmental Conditions
Hamron Steel must only be applied in dry, unexposed conditions that will be free from high humidity and condensation.

Relative humidity: up to 80%

Surface temperature: minimum 5ºC maximum 40ºC

The surface temperature must also be at least 3ºC above dew point.

Optimum drying conditions are at temperatures above 10°C with good air movement.

Physical Data

  • Appearance when dry: matt
  • Colour: white
  • Substrate: primed steel
  • Volume solids: 70±3%
  • Shelf life: 12 months
  • Dry film thickness (μm): 250 400 500 700
  • Wet film thickness (μm): 360 570 715 1000
  • Theoretical coverage (m²/l): 2.80 1.75 1.40 1.00

Safety Data

This product is not combustible.

This product is not a dangerous preparation according to directive 1999/45/EC.

Application procedure

  1. Clean the equipment with suitable solvent , then thoroughly wash with clean water before use.
  2. Stir the product to an even consistency using a power mixer. Thinning is not required
  3. BRUSH/ROLLER- Apply evenly using a clean, well-loaded brush or roller at up to 300 microns (0.3mm) wet film thickness per coat. Allow at least 4 hours drying at 20°C between coats
  4. Clean all equipment with fresh, clean water immediately after use or at least at the end of each working day or shift.

Clear Flame Retardant for Wood

Flametect CWD+

A Unique product For Interior & Exterior use on Cladding, Decking, Partitions, Log Cabins & Sheds. A Clear Flame Retardant Impregnation Treatment for "Absorbent" Wood & Timber Products.

Flametect C-WD+ can be over coated with Specific Clear & Coloured Osmo Coatings. Please contact us for details .

Developed and Manufactured Exclusively by Eco-Sol Ltd in conjunction with a Queens Award For Enterprise Chemical Manufacturer.

  • Tested & Certified to BS EN927-6 Accelerated Weathering Test. (NT053 & NT054)

  • EN16755 DRF EXT for permanent use in exterior applications.

  • Tested to BS476 Class 0 & 1

  • Tested to Euroclass EN13501 Class B-s:2 d:0 

  • Tested in the USA to ASTM74/UL723/NFPA255

Buy Now
Flametect CWD+ Clear Flame Retardant for Wood different sizes

Click on links below to View Test Reports and Data.

Download: BS476 Class 1 Test Report 
Download: BS476 Class 0 Test Report 
Download: 2017 EN 13501-1:2007+A1: 2009​​​​​​
Euroclass B Download: 2021 EN 13501-1:2007+A1: 2009​​​​​​ ​
Euroclass B Download: 2023 EN13501-1: 2018

Download: Product Data Sheet
Download: MSDS

Information

Application Details

Flametect CWD+ is a Clear, Colourless and Odourless Impregnation, it will not discolour, hard or soft woods or other wood derived materials. It does not leave a visible sheen and dries to a natural finish.

Flametect CWD+. Contains environmentally friendly components that assists the active flame retardant components to deeply penetrate the wood. 

Our products are desig​ned to be easily applied using basic DIY skills or we can help source professional contract spraying teams for the larger projects. ​​​​​​​

Unlike our competitors products we have full test reports to  BS476 Class 0, Class 1 & Euroclass B. BS476 Class 0 is not interchangeable with the Euro Classifications. 

Flametect CWD+. the insoluble formulation "locks in" the flame retardant components together  with couplers that protect the flame retardant from harsh environments leaving a weather resistant colourless impregnation once applied & dry.   

  • Certification with every order traceable to A UKAS accredited laboratory

  • ​Manufactured and developed in the UK. 

  • Statement of performance with every order.

  • Produced in an ISO 9001 Quality Assured environment to exacting standards

  • Durable Outdoors. Does not Leach or degrade. 

  • Treatment rate 4 sq. metres per litre  (250ml per square metre)

  • Lowest Finished Cost per m².

  • Non-Hygroscopic / humidity resistant chemistry

  • Non-Corrosive to fixings

  • Does not affect breathability or physical properties of the wood. 

  • For Interior and Exterior Use. 

  • Water based flame retardant. No nasty solvents.

  • Non-toxic, non-irritant                                          

  • Excellent performance on dried grasses & palm leaves

  • Suitable for spray, roller brush or immersion application.

  • Achieves B.S. 476 classes 1 & 0, B.S./EN 13823 Type B & ASTM E-84/UL723/ NFPA255

  • Limitations: Does not achieve BS476 part 21 or 22 (30 or 60 minute resistance.) Does not upgrade standard doors to fire doors. 

  • Can perform to M.C.A. & I.M.O specifications for charter vessels & passenger ships

  • Order by 3:00pm for next day delivery.​​​​​​​

  • Contract Spraying Service.

(Wood & Wood Based Products)

Instructions

  • Flametect C-WD+. may be applied to wood by immersion, spray, brush or roller
  • Apply 250ml Per Square metre.
  • It is important that the desired volume is applied to the wood
  • Ensure wood is dry before application, moisture content should be below 20%.
  • The desired absorption rate for most woods & MDF is 4 square metres per litre
  • Where multiple applications are required please allow approximately 1 hour between treatments.
  • When applied externally protect from the elements allow to dry for 24 -48 hours
  • Do not store below 10 Centigrade
  • Use within 90 days of purchase

Typical Applications

  • Hay and grasses (Tested to BS476 Class 1)​​​​​​
  • ​​​​​​​Timber cladding
  • Interior Cladding for restaurants and bars
  • Sheds & Garages
  • Reclaimed Timber Cladding
  • Decking
  • Log Cabins
  • Saunas & Bathrooms
  • Barn Conversions
  • Summer Houses
  • Dried Palm Leaf Internal & External Features In Bars & Restaurants
  • Loft Conversions
  • Timber Sculpture & Artwork

for Synthetic & Natural Textiles

Flametect Nitro

Unique Features Include:

  • Tested in the UK, EU, French M1, German DIN 4102, USA-NFP701

  • UK Developed and Manufactured Exclusively by Eco-Sol Ltd in conjunction with a Queens Award For Enterprise Chemical Manufacturer. ​​

  • Kinder to you and the material being treated.  Neutral PH & Does not contain corrosive ammonium polyphosphate.

  • Certificate provided with each order for the relevant British Standards. 

  • Non Corrosive to Metals. Unlike other flame retardants it will not corrode metals

  •  Used extensively in SFX, Theatre, TV & Film Costume & Set (Inc Disney On ice, BBC Casualty Dr Who, Game of Thrones, Vikings, Harry Potter etc)

  • Safer than any other flame retardant on the market. Safe to use around younger and older Generations.

  • Supplied to: Fire Service, National Trust, Hotels, Schools, Care Homes, Social Housing & Student Lets.​​​​​

  • Effective on natural and synthetic materials. Decorations and Artificial Plants and trees.

  • Dry Cleanable up to 10 Cycles.  Re-Treatment is required If Wet Washed 

  • Dermally Tested. (Non Irritant).

Buy Now
Flametect Nitro for Synthetic & Natural Textiles

Nitro is the only flame-retardant product available that has been tested independently by the "Institute for Skin and Product Evaluation" for dermal reaction with a full pass result.

Multi-Purpose: use on synthetic or natural materials, preferred for apparel, carpeting and any item that may have a metallic element or embellishment such as curtains with gold or silver yarns or metal furniture that could be tarnished by some corrosive flame retardants.
Our products are desig​ned to be easily applied using basic DIY skills or we can help source professional contract spraying teams for the larger projects.

Click on links below to View Test Reports and Data.

Download: BS5867 P2 type B Damask Fabric Test Report
Download: BS5867 P2 type B Linen Fabric Test Report
Download: BS5867 P2 type B Polyester Lycra test Report
Download: California Fire Marshal Title 19: Section 1237
Heavy Weight Fabric BS EN 13773: 2003 (Test Methods EN1101 1996 & EN13772 2011) Class Result 1
Light Weight Fabric BS EN 13773: 2003 (Test Methods EN1101 1996 & EN13772 2011) Class Result 1

Download: Product Data Sheet
Download: MSDS

Information

Application Details

Our products are desig​ned to be easily applied using basic DIY skills or we can help source professional contract spraying teams for the larger projects.

Iron-on labels: Public Areas such as Hotels, Public Houses, Nursing Homes, B&B's and Schools : It is a legal requirement for Curtains treated with Flame retardant to be labeled with care & durability instructions. 

  • We supply Iron-On Fabric Labels to Identify Fabrics as treated. The labels feature month/year and help to show diligence for maintenance and fire Inspections. 

  • High active solids: 30% compared to around 15% of our competitors products. Which means it goes further and you do not need to saturate the material.

  • Quicker drying times. (Ready to use in 2-3 hours). Easy to apply

  • Non-toxic, non-hazardous formulation and completely Odourless.

  • Halogen & Bromine Free!

  • Non Hygroscopic and Non-Corrosive.

Flametect Nitro test results
Info

Additional Information

Used Extensively In Schools, Colleges, Nursing Homes, Public Houses and Hotels.

Treats: Polyester, Cotton, Silk, Linen flax, Wool, Cardboard, polystyrene, lycra, hessian, foam rubber and most other materials that can absorb.

  • Certification with every order traceable to A UKAS accredited laboratory

  • Produced in an ISO 9001 Quality Assured environment to exacting standards

  • Treats on average 7-10 sq. metres per litre. Possibly more on light weight materials.

  • Water based flame retardant. No nasty solvents.

  • Suitable for apparel & bedding

  • Non sting formula. safe on skin.  

  • Statement of performance with every order.

  • Excellent performance on artificial flowers

  • Suitable for spray, roller or immersion application.

  • Dry clean durable (up to 10 Cycles)

  • Performs To M.C.A. & I.M.O standards for charter vessels & passenger ships (See NX2)

  • Effective on natural, natural/synthetic blends & most synthetic textiles.

  • Order by 3:00pm for next day delivery.

Typical Applications

  • Apply to Natural & Artificial Christmas Trees, Decorations & Costume. 

  • Curtains & drapes, including theatre stage & wing curtains (Inc. Synthetic Materials)

  • Stage props, flat sets & scenery

  • Chairs settees, stools, fixed upholstery & some bedding. 

  • Theatrical costumes & party clothing

  • Boat beds, bunks & curtains

  • Aircraft seating & carpets

  • Artwork, Paper and Card

  • Artificial Grass (Astroturf)

  • Papier mache projects & collages

  • Papier mache projects & collages

  • Lighting special effects for theatre & stores

  • Tapestries & wall hangings

  • Banners & signs for internal use

  • Rugs & Carpets (Including Synthetic Carpets)

  • Temporary fireproof barriers

  • Retail Displays

  • Wall Paper and Coverings

  • Hay & straw internal scenery for seating

  • Foams & Sponges

  • Artificial & dried natural flowers & foliage